Home > Fujitsu Lifebook > Fujitsu Lifebook B142 Drivers

Fujitsu Lifebook B142 Drivers

This driver is based on Harald Hoyer's Touch Panel Driver for the B142, which was developed for XFree 3.x. It is straightforward to set up and easy to use. Please, choose appropriate driver for your version and type of operating system. Home | About | Legal Stuff | Last revision: 2013-06-06. © 2002...2013 by Jörg Hau. check over here

This notebook came with only 32MB RAM, but it could be used smoothly under MS Windows 98. My B142 came with a Trendnet TE-210CT network card, which provides a 10 MB/s connection. With the fresh battery, the autonomy of the B142 was close to 4h again. The version delivered with the B142 can apparently only be used with a fresh install, but not if the size of RAM is changed later on ... http://support.fujitsupc.com/CS/Portal/supportsearch.do?srch=DOWNLOADS&Series=B%20Series&Model=B142&ProductType=Notebook%20PC

And ... Driver name: Audio DriverDriver version: 4.05.00.1095Release date: 11 Jan 2011Supported OS: Windows 98 SE, Windows 98 Download Driver name: Complete KitRelease date: 11 Jan 2011Supported OS: Windows 98 SE, Windows 98 All Rights Reserved. well, to make a long story short: You can download a more recent version of phdisk.exe at the DELL support website, which worked just fine with my B142.

New life for Lifebook B142 with Ubuntu 6.10. You may want to include the following packages, if they are not already selected: pcmcia and cardctl (instead of schemes) ltmodem apmd (the B142 does not support ACPI) irda To have Using outdated or corrupt Fujitsu LifeBook Biblo B142 drivers can cause system errors, crashes, and cause your computer or hardware to fail. The B142 Essentially, the B142 is a small notebook PC with Celeron-300 Processor, 4.2-GB harddisk, 800x600 colour touchscreen, one PCMCIA slot and two USB ports.

The files can be modified separately and unison propagates the changes in each replica to the other. I have asked Fujitsu/Siemens what procedure they recommend to ensure longest battery life. This enables to use different configuration files for different computers: I synchronise data on my LifeBook with my desktop computer and I synchronise other - even partially "overlapping" - data on http://support.fujitsupc.com/CS/Portal/supportsearch.do?srch=TECHSPECS&Series=B%20Series&Model=B142&ProductType=Notebook%20PC The modem: dial-up and fax The modem identifies itself at a Lucent Winmodem.

These are pre-set configurations that are described in /etc/pcmcia/network.opts. For this, I downloaded the FC6 rpm package and extracted only the binary: cd temp wget ftp://fr2.rpmfind.net/linux/fedora/releases/8/Everything/i386/os/Packages/unison-2.13.16-3.fc6.i386.rpm rpm2cpio unison-2.13.16-3.fc6.i386.rpm | cpio -i --make-directories mv usr/bin/unison /usr/local/bin/unison-2.13 The switch --make-directories means to However, using KDE led to enormous swapping activities, which is why I soon upgraded to a full 160MB. The part number of the battery is CA54200-0472; it's a 10.8V, 3200mAh battery.

Furthermore, installing the wrong Fujitsu drivers can make these problems even worse. Just create /dev/pilot as a symlink that points to /dev/ircomm0: chmod 666 /dev/ircomm0 ln -s /dev/ircomm0 /dev/pilot In addition, make sure that you have a line like export PILOTRATE=115200 in your Now, upgrading all copies of unison was going to be tedious due to a number of dependencies, so the solution was to provide an "old" copy (with matching version number) on In my case, this was resize 1 0.031 400 followed by resize 1 0.031 819.492.

However, on a small, usually single-user machine like a Notebook it would probably be oversized. check my blog This can be changed easily in /etc/X11/XF86Config, by setting ClickTimer to "0". it's almost magic ;-) Setting up the IrDA connection to communicate with a Palm OS device (PalmIII and PalmVx) turned out to be easy. on a portable computer and a desktop.

  • I launched parted again ...
  • Note: With SuSE 7.1, the soundcard locked up the B142 upon a warm reboot, independent from all the BIOS settings I have tested.
  • Do not forget to actually activate the APM daemon (apmd ;-). (SuSE 7.3: These parameters are in /etc/rc.config.d/apmd.rc.config; in addition, set START_APMD="yes" in /etc/rc.config.).
  • I launched parted again and entered the command resize 1 0.031 819.492.

Harddisk upgrade: Mark Srebnik reported that he has successfully replaced the 4.2GB stock harddisk with a Seagate 100GB 5400 RPM Momentus series drive. The configuration (i.e., which directories to synchronise, what to ignore etc.) is held in a plain-text configuration file which is specified on the command line. Most of the issues described here are therefore "non-issues" with a more recent computer. this content The modem shares an IRQ with the PIC.

Notes for SuSE 7.3: Install the kernel sources, extract the package and follow the instructions in the 1ST-README file (if you upgrade the kernel later on, re-build the drivers again, using Performance Fast enough In its default configuration with 32MB RAM, the machine performs very well under MS Windows 98. Download Now © 2016 Drivers Guide Skip to content Search Advanced search Quick links Unanswered topics Active topics Search The team FAQ Login Register Board index Archives talkĀ² Archives Notebooks

Time to install Linux.

Partitioning Disk Space Considerations The overall disk size of 4.2GB is largely sufficient to install a dual-boot system with Linux and MS Windows. When I acquired this notebook, the capacity of the battery was still sufficient for more than three hours of work with not-too-much harddisk activity, but about one year later the battery where the two different versions are available), I need to call the specific version: /usr/local/bin/unison-2.13 b142 Links Linux on Laptops The Laptop-related HOWTOs at tuxmobil.org. IrDA The B142 has two serial ports.

There is a Linux version of phdisk, however this is at present only capable of formatting a suitable partition, not a file. Dealing with different versions of unison After upgrading my primary computer to a more recent version (from Fedora Core 6 to Fedora 8), I ran into the problem of having different Generally, I do not want to change any CDs during setup. have a peek at these guys The built-in pointing device is complemented by a soft plastic pencil (just like that of a PDA), which is much faster than the mouse.

As I already had four primary partitions on the disk, I did not want to mess those up and preferred to stay with a hibernation file, not a hibernation partition. It is equipped with an internal modem and IrDA. one day, I arrived in the office as usual and took the B142 out of my rucksack ... This bug can be fixed by modifying /etc/ppp/ip-up: In section ppp*), at the beginning of the first case ...

Note that this file is located on the Win98 partition, i.e. I keep this page merely as reference material: With a recent Linux distribution, the installation on a portable computer is now as easy and straightforward as the installation on a desktop Thus, on my B142, I use efax, a small but well-designed piece of software. This tool will download and update the correct Fujitsu LifeBook Biblo B142 driver versions automatically, protecting you against installing the wrong LifeBook Biblo B142 drivers.

Do not forget to set the same entry for MODEM also in /etc/rc.config - you must do this manually, as YAST does not know this device and if you forget this A slight disadvantage of such a lot of memory is that it takes "some" time to be written to disk: swapping 160 MB to the hibernation file takes about 30s. This is a file-synchronization tool which allows two "replicas" of a collection of files and directories to be stored e.g. Note that in this case DragTimer must be >0, otherwise the drag function will not work.

A quick verification showed that the calculation was indeed correct. Unison has the particular advantage that it can deal with updates to both "replicas". Updates that do not conflict are propagated automatically, and conflicting updates are detected and displayed before any action is taken. To obtain a new battery, Fujitsu/Siemens Switzerland turned out to be the least expensive and also the fastest source: It cost about 220CHF (including shipping) and was delivered within two working

All that is needed to switch between the "home" and "office" setup is to invoke cardctl, e. But ... The only problem is that lighting is a bit weak if you work off the batteries in a bright environment. Installing Linux General Setup Over the years, my Lifebook has seen SuSE Linux 7.1, 7.3 and finally (before I sold it) 9.0.

An amazing screen The screen resolution is at an amazing 120dpi, which yields a clear and crisp picture. Solvusoft's close relationship with Microsoft as a Gold Certified Partner enables us to provide best-in-class software solutions that are optimized for performance on Windows operating systems.